ADVANCED MENU FEATURES
SETTING UP THE AUTOLOCK™ ACCESS CODE
Y
our AutoLock™ access code allows
you to enter the AutoLock™ sub-
menus to set up or turn off blocking.
Your access code is also the “key” that
unlocks programs or channels that are
being blocked by AutoLock™.
1
Press the MENU button on
the remote control to show
the onscreen menu.
2
Press the CURSOR
DOWN button twice to
highlight FEATURES.
3
Press the CURSOR RIGHT
button. Then press the CUR-
SOR DOWN button once to
highlight the AutoLock control.
4
Press the CURSOR RIGHT
button to activate the
AutoLock menu.
5
Press 0,0,0,0 on the remote
control. The AutoLock menu
will appear.
6
Press the CURSOR
DOWN button three
times, then the CURSOR
RIGHT button to open the
New Code screen.
7
Enter your new four-digit
code twice.
8
Press the INFO/EXIT but-
ton exit the menu.
9
Use these steps to reset
your code if you lose it.
Instead of 0000 in step 5,
use 0711. This is the reset
code.
• If you discover that your access
code has been changed, you can
assume that blocked channels may
have been viewed.
• For the AutoLock to work with digital
channels, the AutoChron must be set.
See panel 29.
HELPFUL HINTS
Record your
personal code below:
21
