C
onvergence is the correct
lining up of the red and blue
light paths on the DPTV screen.
NOTE: If no color fringing (see
Smart Help) shows, then no
Convergence adjustments are
necessary.
Select the ATSC Convergence
control.
With Picture Menu on-screen,
move the highlight with the
MENU (M) ▲▼ buttons. Then
press the MENU button.
Press the MENU ▲▼ buttons
to select either the Align Red or
Align Blue Convergence control,
press the MENU button to
continue.
Press the MENU buttons
to move the selected red (or blue)
convergence cross directly over the
white cross on the DPTV screen.
The red (or blue) cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).
Press the “exit” button to clear
the screen when convergence
adjustments are complete.
Remember, Convergence
has been set at the factory for
best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
fringing) follow the steps given in
this section.
