14
English
Connections
Using S-Video In jack
● Use the S-Video cable (not supplied) to
connect the system’s S-VIDEO jack to the
S-Video input jack (or labeled as Y/C or S-
VHS) on the TV set.
● To listen to TV channels through this system,
use the audio cables (white/red) to connect
AUX IN jacks to the corresponding
AUDIO OUT jacks on the TV set.
● Deactivate Progressive Scan through
SYSTEM MENU. Refer to “Using the
Setup Menu- Using Progressive Scan to
improve image quality”.
IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
● Use the composite cable (yellow) to connect the
system’s VIDEO jack to the video input jack on
the RF modulator.
● Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s RF jack.
● Deactivate Progressive Scan through SYSTEM
MENU. Refer to “Using the Setup Menu- Using
Progressive Scan to improve image quality”.
p001-025-FWD798_37_EngA 2006.5.22, 3:36 PM14
