2 Put the massager in the battery-removal bag supplied.
3 Put the battery-removal bag with the massager in it in the freezer
for at least 24 hours.
4 Take the bag from the freezer. Immediately put the bag on the
ground and stamp on it with your foot to break the massager.
Caution: Only do this while wearing solid shoes. Attempting this with
bare feet could cause injuries.
Note: If the above treatment has not broken the massager, repeat steps 3
and 4.
5 Open the bag and take out the massager parts.
6 Unscrew the printed circuit board from the rechargeable battery
withaat-headscrewdriver.
Candles
1 Use a screwdriver to pry loose the battery housing inside the
candle.
2 Remove the battery housing from the candle.
3 Insert a screwdriver into the connection groove between the base
and the cover of the battery housing. Press down the screwdriver
to detach the cover from the base (Fig. 14).
4 Lift the battery out of the base.
Guarantee & service
If you need service or information or if you have a problem, consult our
website
www.philips.com/intimatemassager, or contact the Philips
Consumer Care Centre in your country (you nd its phone number in
the worldwide guarantee leaet).
ENGLISH 15
