You can access a list of previously viewed
channels with the Surf button on the remote
control. With Surf you can easily switch
between different TV channels that currently
interest you. Surf allows you to set up the tele-
vision to cycle through two or nine channels
by pressing the Surf button on the remote con-
trol.
1
Press the Menu button on the remote
control to display the on-screen menu.
2
Press the Cursor Down button to select
“Settings.”
3
Press the Cursor Right button to select
the “General” menu.
4
Press the Cursor Down button repeat-
edly to select the “Surf” control.
5
Press the Cursor Right button to toggle
the Surf control to “2 channels” or “9
channels.”
6
Press the Menu button to remove the
on-screen menu from the TV screen.
7
If you selected the “2 channels” Surf
option, pressing the Surf button allows
you to alternate between the currently
viewed channel and the previously
viewed channel.
If you selected the “9 channels” Surf
option, pressing the Surf button dis-
plays a Surf list in which you can
place up to 9 favorite channels. A/V
sources also can be included in the list.
To add a channel to the list, tune to the
channel, press the Surf button, then
press the Cursor Right button.
If you attempt to add more than 9
channels to the list, the channel on the
bottom of the list will be automatically
removed to make room for the newly
added channel.
After you have placed your favorite
channels in the list, press the Surf but-
ton as many times as necessary to tune
to the desired favorite channel. Or,
with the Surf list displayed, press the
Cursor Down or Up buttons to tune to
the desired channel.
To remove a channel from the list,
press the Surf button to display the list,
press the Cursor Down or Up buttons
until you select the channel you want
to remove, then press the Cursor Right
button.
2 Channels Surf
9 Channels Surf
Using Surf
