C
olor space refers to how colors are
defined and appear on your TV. Your
TV’s default color-space setting for
HD INPUT-AV 4 is YPbPr, and for HD
INPUT-AV 5 it is RGB. If the picture’s color
looks grossly incorrect, try changing the
color-space setting on the TV. Or if you’re
using an HD receiver, you may try changing
its color-space setting. See the receiver’s
directions-for-use manual for more informa-
tion To set the TV’s color space, follow the
steps below.
1
Press the AV button on the remote
control as many times as necessary to
select the desired HD signal source
(AV4 or AV5).
2
Press the MENU/SELECT button.
The onscreen menu appears.
3
Press the CURSOR RING DOWN
repeatedly until INSTALL is highlight-
ed. Then press the CURSOR RING
LEFT or RIGHT to enter the
INSTALL submenu.
4
Press the CURSOR RING DOWN
repeatedly until the AV option (AV4 or
AV5) you desire is highlighted. The
current color-space setting is shown
(either YPbPr or RGB).
If you want to change the setting, press
the CURSOR RING LEFT or RIGHT.
5
Press the STATUS/EXIT button to
exit the menu.
