Dual Mono, Dynamic Range Compression 37
Dual Mono
Adjust DUAL MONO to choose whether you want to hear sound from
the Disc’s left or right audio channel or both.
1
Press SYSTEM MENU.
2
Press 9 to select AUDIO SETUP. Press OK.
3
Press 9 to select DUAL MONO. Press :.
4
Press 8 or 9 to select STEREO, L-MONO, R-MONO, or
MIX-MONO, then press OK.
● Select Stereo to hear normal two-channel Stereo.
● Select L-MONO to hear only the left channel.
● Select R-MONO to hear only the right channel.
● Select MIX-MONO to combine the sounds available on an
Audio CD. For example, when playing a karaoke Disc,
choose MIX-MONO to hear both vocals and music.
5
Press SYSTEM MENU to remove the menus.
1,5
2-4
Dynamic Range Compression
Dynamic Range Compression reduces sudden volume changes by letting
you adjust the difference between soft and loud sounds.
1
Press SYSTEM MENU.
2
Press 9 to select AUDIO SETUP. Press OK.
3
Press 9 to select DYNAMIC. Press :.
4
Press 8 or 9 to set Dynamic Range Compression to 1/8
through 8/8 or to turn it OFF, then press OK.
To hear the full range of sounds as recorded, choose OFF or a
lower ratio such as 1/8 or 2/8. To minimize the difference in vol-
ume between loud segments (such as explosions or car chases)
and quiet scenes, choose a higher ratio such as 6/8 or 8/8.
5
Press SYSTEM MENU to remove the menus.
