English
MANAGING DISC CONTENT 55
Disc Settings
You can change disc settings from the Disc Information
Screen.
1 When in the Index Picture Screen, press 9 STOP
or press and hold J PREVIOUS for about two
seconds.
‰ This selects the first title on the DVD+RW.
2 Press v (up cursor).
‰ You enter the Disc Information Screen.
3 In the Disc Information Screen, press u (right
cursor.)
‰ You will enter the ‘Settings’ menu.
4 Use w/v (down or up cursor) to select the item
you wish to change, then follow the steps below for
each item.
Disc name
5 Press u (right cursor) to select ‘
Disc name
’.
6 Enter the new name. A name may contain a
maximum of 64 characters.
Use t/u (left or right cursor) for the position of the
characters. Use w/v (down or up cursor) to change
characters.
l Use SELECT to toggle between capitals and lower
case characters.
7 Confirm the name by pressing OK when you are
finished.
Protection
6 Select
Protection
. Press u (right cursor) to select
Protection.
7 Select ‘
Protected
’ with w/v (down or up cursor.)
8 Press OK.
‰ No further changes can be made to the disc
including recording. ‘Disc Locked’ will appear on the
TV screen if you attempt recording.
It will also disable most title/disc manipulation screen
entries, as well as the complete edit menu.
‰ Future editing or recording is only possible after
resetting the Protection feature to ‘
Unprotected
’
again.
Erase disc
6 With ‘
Erase disc
’ selected and press OK.
‰ The message '
This will erase all titles
’ is
displayed. Press OK to confirm.
l Press OK to confirm and begin erasing or press t
(left cursor) to cancel.
‰ ‘
Erasing disc
’ is shown until the action is
completed.
‰ After the disc has been erased the Index Picture
Screen will show the free space on the disc.
Make edits DVD-compatible
If titles have been edited (See ‘Favorite Scene Selection’),
the edits will play on your DVD Recorder. However a
DVD player may show the original versions instead of
the edits. You can prepare your discs so that a DVD
player will also play the edited version.
1 If the Disc Information Screen shows the option
‘
Make edits DVD
-
compatible
’, press u (right
cursor) to select this option. If the menu does not
show this option, your disc is already compatible.
No conversion is needed.
2 Press OK.
‰ The messages ‘
This will take
...’ and ‘
Press OK
to confirm
’ will appear to indicate how long the
action will take.
3 Press OK.
‰ ‘
Working
...’ and a progress bar are shown until
the action is completed.
