set qos map vlan-cos-map Set vlan based qos
set qos queue egress-policy Set the egress policy
set security MAC-aging Set MAC aging time
set security filter-MAC Create MAC filter entry
set security mac-learning Set port leanrning MAC (enable|disable)
set security static-MAC Create static MAC entry
set snmp Enable/Disable snmp agent
set snmp community Set snmp community string
set spantree fwddelay Set the forward delay for the spanning tree
set spantree hello Set the hello interval for the spanning tree
set spantree maxage Set the max age interval for the spanning
set spantree priority Set the bridge priority for the spanning tree
set system contact Set system contact
set system default-gateway Set default gateway
set system ip Set system ip mask
set system location Set system location
set system mac Set system mac address
set system management-vlan Specify a vlan for system management
set system name Set system name
set trunk Set vlan trunk port
set vlan <vid> name Set vlan name
set vlan <vlan id> <portlist> Set vlan members
set vlan type port-based Set system be port-based vlan
set vlan type dot1q-based Set system be dot1q-based vlan
set snmp rmon Enable/Disable rmon state
set snmp trap Set snmp trap receive host
set spantree disable Disable spanning tree
3.5.2.6 Show command
Show command is to display the current parameter of the switch functions. The follow table lists the show
commands and the equivalent usages.
Command Description
show channel Show channel information
show console-info Show console-info
show igmp-snooping Show igmp snooping information
show ip http server Show http server information
show ip telnet server Show telnet server information
