Appendix A – Console Commands
Polycom, Inc. 86
If you have completed all the above configurations and launched Console successfully, press the Enter key.
The login interface appears.
Console Command Descriptions
You can use the following commands.
Network Settings
Select Network Setting and type Enter to set network configurations (DHCP IP address and static IP
address) for LAN 1 or LAN 2.
To configure Static IP Address for LAN 1 or LAN 2
1 Choose a network interface, click OK or type Enter.
2 Select Static Address Setup, click OK or type Enter.
3 Configure network settings.
4 Click Save configuration if you are fine with the settings or Cancel to return.
5 The system will show the prompt message Yes to save the configuration? Choose Yes to proceed
or No to cancel.
6 At the popup message, click Yes if you want the system to restart to apply your changes.
Parameter Description
IP Address IP address of the network port
Default Gateway Gateway address of the network port
Subnet Mask Subnet mask of the network port
