Quatech, Inc. AirborneDirect™ User Manual
26 2/21/2011 100-8510-110
7.1 AC Electrical Characteristics – Transmitter
Transmit power is automatically managed by the device for minimum power
consumption. The transmit power at the RF connector is +15dBm 2 dBm for
802.11b/g Modes (all rates).
7.2 Performance/Range
The following table illustrates the typical data rates, performance and range the
device is capable of providing using an omni-directional antenna.
Table 12 - Radio Typical Performance Range
Typical Outdoor Distance
(Unity gain antenna)
Typical Outdoor Distance
(2dBi antenna gain on each end for
B/G mode)
Ranges are affected by receiver sensitivity; transmit power, free-space path loss,
antenna gain, and link margin. Actual range will vary from those stated. Non-line-
of-site applications will result in typical values less than shown above.
The Data Rate is the supported connection rate for the wireless link, the actual
data throughput for the link will be less than the stated data rates.
