FEATURE SET
6. From amp input jack
Used to receive the speaker output
signal from the amp head. Maxi-
mum input 120 watts.
7. Speaker-1 output jack
Used to connect to your
main speaker cabinet.
8. ALT-Z input jack
Designed for amps
that are equipped with multi-tap
transformers with various speaker
impedance options to properly
match amp and speaker loads.
9. Speaker-2 output jack
Used to connect to your second
speaker cabinet.
10. LED indicators
Large, easy to see LED indicators
for instant visual monitoring of
speaker cabinet status.
11. Footswitch On
board footswitch is used to select be-
tween speaker cabinet one or two.
True to the Music
Radial Engineering Cabbone Owner’s Manual
2
1. Power supply input
15VDC supply is included with the
Cabbone.
2. Slingshot remote output Can
be used to send a channel change
command to the guitar amplifier or
to another Cabbone for large multi-
amp stage set-ups.
3. Remote output assign
Allows you to configure the output
switching to match your amplifier’s
footswitch configuration for latching
or momentary operation and tip or
ring positive with dual function ¼”
TRS switch types.
4. Slingshot remote input
Used to receive a status change
command from a remote foot-
switch, another Slingshot equipped
pedal, or a MIDI controller.
5. FT SW assign
Allows the Cabbone to receive
speaker status change commands
from the on-board footswitch, or
from an external device. When set
to external, the Cabbone’s foot-
switch is defeated.
