Manual-2
Rear Panel Description
Front Panel Description
1 Signal/Overload LED meters indicate the presence of signicant audio signal or overload for Inputs and Outputs. ese 3-color
meters indicate the available headroom once the analog signal has been converted to digital: -4 dBFS (red, near clipping), -12
dBFS (yellow, high normal level), and -48 dBFS (green, low level). e signal level in the RPM 2m depends on the input and
output settings and is displayed in Drag Net’s Meter window when the Converters tab is selected.
2 PRESET LED displays the number of the most recently recalled Preset, numbered 0 through 24.
3 VIP LED ashes when a change is detected on the Versatile Input Port (VIP). is port is used for direct electrical connections to
potentiometers, switches or other logic ports. See page Manual-4 for details.
4 ETHERNET LED ashes when an Ethernet data packet for this device is received.
5 STATUS LED reects the overall status of the unit:
Red - initializing (briey) or possible internal error (steady).
Yellow - working, but not yet processing audio.
Green - processing audio.
6 POWER LED lights yellow when the unit is powered on.
1 POWER IEC jack connects to AC line voltage, 100-240 VAC ±10%.
2 Balanced analog audio INPUTS 1 and 2 on Euroblock and XLR connectors. See “Audio Connections” on the following page.
3 Balanced analog audio OUTPUTS 1 and 2 on Euroblock and XLR connectors.
4 AES3 digital audio OUTPUT uses a xed 48 kHz sample rate and 24-bit word length. See “Audio Connections.”
5 VERSATILE INPUT PORT provides 8 logic or voltage inputs for remote level control and Preset recall on a Euroblock.
6 LAN and LINK reect the state of the Ethernet connection. LINK lights solidly when a valid connection to another Ethernet
device (e.g., a PC or network) is detected. LAN ashes when communicating with another Ethernet device.
7 10Base-T jack accepts a standard Ethernet cable with a RJ-45 connector.
8 DEFAULT button recalls Preset 1 when pressed. Holding this button while applying power puts the unit into a special codeload
mode for updating rmware.
INPUT
OUTPUT
12
12
AES3
AB
VIP POWER
ETHERNET STATUS
RPM 2m
PROGRAMMABLE
MULTIPROCESSOR
PRESET
19
1 1 1 2 3 4 5 6
DEFAULT
10Base-T
LINK
LAN
R
RPM 2m
AES3 OUTPUT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES FOR A CLASS 'B' COMPUTING DEVICE.
INPUTSOUTPUTS
2 1
2 1
1 8 7 54 3 26
