1
28
Introduction
Custom Setting Menus
Menu Item Function Default Setting Page
E1
1 EV Steps Sets the adjustment steps for exposure. 1/3 EV Steps p.48
2 Sensitivity Steps Sets the adjustment steps for ISO sensitivity. 1 EV Step p.51
3 Meter Operating Time Sets the meter operating time. 10sec. –
4 AE-L with AF Locked
Sets whether to lock the exposure value when the focus is
locked.
Off –
5 Link AE and AF Point
Sets whether to link the exposure and AF point in the focusing
area.
Off p.52
6 Auto EV Compensation
Automatically compensates the exposure when the correct
exposure cannot be achieved with the current settings.
Off –
7 Bulb (B) Mode Options Sets the camera operation when pressing 0 in M mode. Type1 –
E2
8 Bracketing Order Sets the order for Bracketing shooting. 0 - + p.62
9 One-Push Bracketing Shoots all frames with one release when using Bracketing. Off p.62
10 Interval Shooting Options
Sets whether to start counting the time of interval from when
exposure starts or when exposure ends for Interval Shooting,
Interval Composite, and Interval Movie Record.
Interval p.65
11 AF in Interval Shooting
Sets whether to lock the focus position used when the first
picture is taken or perform autofocus for each exposure for
Interval Shooting and Interval Composite.
Locks focus at
1st exposure
p.65
12 WB Adjustable Range
Sets whether to automatically fine-tune the white balance
when the light source is specified for the white balance setting.
Fixed p.69
13 WB When Using Flash Sets the white balance setting when using a flash.
Auto White
Balance
p.69
14 AWB in Tungsten Light
Sets the tungsten light color tone when the white balance is set
to [Auto White Balance].
Strong
Correction
p.69
