155
Applying Various Effects to the Sound
Applying Various Effects to the Sound
You can produce various sound effects simply by moving your hand above the
D Beam controller on the panel.
1.
Press either the [Pitch], [Filter], or [Volume] button for the D
Beam so the button is lit in green.
2.
Move your hand above the D Beam controller.
The sound effect assigned to the D Beam controller will play.
Turning the D Beam Controller Off
3.
Press the button you pressed in step 1 several times so its
light is turned off.
Moving Your Hand Above the D Beam Controller to Produce a
Sound Effect
Button Button status Description
Pitch Lit (green)
A bass drum and cymbal will sound.
Filter
Lit (green)
The cymbal will be struck with gradually
increasing force.
Volume
Lit (green)
The sound of a wind chime is produced.
When the [Pitch], [Filter], or
[Volume] button for the D Beam
is lit in red, an effect will be
applied to the sound when you
move your hand above the D
Beam controller (p. 154).
AT-900_e.book 155 ページ ２００７年９月７日 金曜日 午前８時４３分
