14
Panel Descriptions
fig.unit01-e.eps
MIC L/MIC R
This is a stereo pair of mics built into the CD-2e.
You can use these mics to record.
☞
“Recording with the Internal Mics” (Page 36)
[MIC] Knob
This adjusts the input level of the internal mics and
the EXT MIC jack.
fig.mic-peak.eps
If the input sound is too loud, the peak
indicator above the [MIC] knob will light.
* If you turn the [MIC] knob all the way to the left, no
sound will be input from the internal mics or the EXT
MIC jack.
* If the [MIC LEVEL] switch is in the “AUTO” position
(Page 38), the input level will be set automatically, and
you won’t be able to adjust the input level using the
[MIC] knob.
☞
“Recording with the Internal Mics” (Page 36),
“Connecting an External Mic for Recording” (Page 39)
[LINE] Knob
This adjusts the input level of the LINE IN jack.
fig.mic-peak.eps
If the input sound is too loud, the peak
indicator above the [LINE] knob will light.
* If you turn the [LINE] knob all the way to the left, no
sound will be input from the LINE IN jacks.
☞
“Recording an Electronic Instrument” (Page 42),
“Recording a Cassette or MD” (Page 44)
[VOLUME] Knob
This knob adjusts the volume of the internal
speakers and the headphones.
☞
“Listening to a CD/ Listening to an SD Memory Card”
(Page 60)
[ (Stop)] Button
This button stops playback or recording.
☞
“Listening to a CD/ Listening to an SD Memory Card”
(Page 60)
[ (Play)] Button
●
This button starts playback or recording.
●
During playback or recording, you can press this
button to pause. Press it once again to resume
playback or recording from the location at which
you paused.
●
If you pause recording, the next track will be
started at the point you resumed recording.
☞
“Listening to a CD/ Listening to an SD Memory Card”
(Page 60)
[ (Record)] Button
●
Press this button to enter recording-standby
mode.
●
During recording, you can press this button to
assign a track number.
☞
“Press the [ (Record)] button to Assign a Song
number” (Page 54)
Top Panel
CD-2e_e.book 14 ページ ２００７年９月１０日 月曜日 午後８時５７分
