Recording
English - 61
Making a Timer Recording
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check the date and time are correct.
Make sure the Clock has been set (Setup - System Setting)
before you proceed with a timer recording.
Press the TIMER REC button.
• Scheduled Record List screen is displayed.
Using the MENU button:
! Press the MENU button.
@ Press the❷ buttons to select Timer Rec., and
then press the ENTER or
❿ button.
# Select Timer record.
• If the current time is not set. Set the current time
first.
1
Use the channel ❷ button or number
buttons to select the channel to record.
• CATV channel: 1 to 125
• TV channel: 2 to 69
1
Making One Touch
Recording (OTR)
One-Touch Recording (OTR) allows you to add recording
time in 30-minute increments up to 4 hours at the touch of
a button.
Start Recording.
Follow the instructions on page 60 to begin record-
ing.
2
Activate OTR.
While in Record mode, press the REC button again
to activate One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen
Display and the DVD Recorder-VCR will record
for exactly 30 minutes.
3
Add Recording Time.
Continue pressing REC to add recording time in 30
minute increments up to 4 hours.
• The DVD Recorder-VCR stops recording automat-
ically when the time has elapsed.
4
Using the TIMER REC button
