Setup
100
Version
(Menu 9-5)
This menu allows you to view the software and
hardware versions of your phone. This feature is
helpful if you need to the call customer care.
Security
(Menu 9-6)
Your phone provides you with various security
options, including a user-programmable lock code
and special number features.
To access the
Security
menu, you need to enter a
lock code. It is preset to “0000” at the factory.
Lock Phone
(Menu 9-6-1)
In this menu, you can lock your phone from being
used by unauthorised people.
When the phone is locked, you cannot dial
numbers, except for making an emergency call, or
access menu options. The phone can receive
incoming calls and messages, even though the
phone is in Lock mode.
The following options are available:
Unlocked
: The phone remains unlocked.
On Power-up
: The phone locks automatically the
next time you turn on phone.
Lock Now
: The phone locks immediately.
Setup
101
To place an emergency call in Lock mode, enter a
programmed number and then press . The
phone recognizes three standard emergency
numbers stored in the
Emergency
#
menu
(
Menu 9-6-4
); see page 101.
To unlock the phone, press one of the soft keys,
Volume keys, Navigation keys, , or and then
enter the 4-digit lock code. The phone is
immediately unlocked.
Change Lock
(Menu 9-6-2)
This feature allows you to change your current
lock code to a new one. The lock code is preset to
“0000” at the factory.
Enter a new, 4-digit lock code and press . Enter
it again to confirm your change and press .
Note
: Your phone does not allow viewing of the lock
code for security reasons. Be sure to write the
lock code down or memorize it if you have
changed.
Restriction
(Menu 9-6-3)
This feature allows you to restrict all of the
outgoing calls.
Select
On
to restrict the calls, or
Off
to deactivate
the restriction.
Emergency #
(Menu 9-6-4)
Your phone provides you with the option of storing
three emergency numbers. All of these numbers
can be manually dialed at any time even if your
phone is locked or outgoing calls are restricted.
