11. Press (left softkey) to send the message.
To change the recipients or to save the message as a draft, press
(right softkey) and select Chg Recipients or Save to Drafts
during steps 7-10 on the previous page.
ᮣ
Chg Recipients to change Recipients.
ᮣ
Send Callback# to select from None, My Phone#, or Other to
notify your recipients of your callback number. (See “Setting
Your Callback Number” on page 40.)
ᮣ
Save to Drafts to save the message to a Drafts folder.
(See below to edit and send the draft message.)
Note: If there is a failure when sending a message in no-service area,
you are prompted to select to send the message automatically. Press
(left softkey), and the message goes to the Outbox folder with . If
you press (right softkey), the message goes to the folder with .
(See next page to send the message.)
Sending a Message in the Drafts Folder
To edit and send a message in the drafts folder:
1. Press to access the main menu.
2. Highlight Messaging and press .
3. Highlight Text Msg and press .
4. Highlight Drafts and press .
5. Highlight the message you wish to edit and press (left
softkey).
6. After editing the message press (left softkey) to send the
message.
Tip: The oldest message in the drafts folder will be erased when you
save more than 10 messages.
Send
Edit
No
Yes
Options
Send
113
Sending a Message
1. Press to access the main menu.
2. Highlight Messaging and press .
3. Highlight Send Text and press .
4. Highlight From Phone Book, Mobile Phone#, or Email Address
and press to enter recipients.
ᮣ
From Phone Book to select a recipient from your Contacts list.
Highlight an entry and press to select. Or select
<Add Entry> to enter a new entry. Press (left softkey)
when you are finished selecting/entering recipients.
ᮣ
Mobile Phone# to enter a mobile phone number directly.
ᮣ
Email Address to enter an email address directly.
Tip: If you have unsent messages, you are prompted to send the
messages during step 4 above.
5. To add a recipient, press (right softkey), highlight
Add Recipient, and press .
ᮣ
Edit to edit the selected entry.
ᮣ
Erase to erase the selected entry.
ᮣ
Erase All to erase all entries you have selected/entered.
ᮣ
Add Recipient to add recipients.
6. Press (left softkey) when you are finished
selecting/entering recipients (you may include up to 10
recipients).
7. To enter a message, select the box under Message and
press .
8. Use your keypad to enter a text message (or press the right
softkey to select from PresetMessages or Recent Messages)
and press .
9. To set the message priority, select the box under Priority and
press .
10. Highlight Ordinary or Urgent and press .
Next
Options
Done
112
