27
Cabinet makes
popping sound.
● Press POWER key.
● Turn off the TV with the
MAIN POWER switch momentarily.
TV turns off
automatically.
HELPFUL HINTS - Problems/Solutions
BEFORE REQUESTING SERVICE CHECK THE FOLLOWING CHART.
Problem: Check these Conditions: Try these solutions:
● TV will automatically switch off.
(See pages 10, 19 and 20.)
● Power surge protection feature.
No picture or
poor picture
● Check antenna connections.
● May be station trouble.
● Possible interference from
household appliance.
●
Brightness or Contrast misadjusted
● Adjust antenna.
● Try a different channel.
● Press IMAGE key to select
NATURAL picture mode.
(See page 18.)
Poor color or no
color
● Check if program is in color.
● Check antenna connections.
● May be station trouble.
● Color or Tint misadjusted.
● Try a different channel.
● Adjust antenna.
● Press IMAGE key to select
NATURAL picture mode.
(See page 18.)
Blue screen with
AV1
/
AV1(DVD
/
AV2
displayed.
● Check A/V connections.
● Check external equipment.
● Press TV/AV key.
● Switch on external equipment.
Black screen
with and
Channel number
displayed.
● Check to see if channel is set
as the Private Position.
● See Setting of the Private
Position (See pages 21-22.)
No sound or
poor sound.
● May be station trouble.
● MUTE may be on.
● Check A/V connections.
● Try a different channel.
● Press MUTE key.
● Press VOLUME + key.
No Cable
channels above
number 13.
● Cable channel Indicator C
should appear next to
channel number.
● Select CABLE signal and
reset channel search.
(See page 14.)
No UHF
channels,
VHF OK.
● Cable channel Indicator C
should not appear next to
channel number.
● Select VHF/UHF signal
and reset channel search.
(See page 14.)
● This is a normal condition during warm-up and cool down of
the plastic cabinet parts.
Cannot select
or scan some
channels.
● Channel may be removed
from memory.
● Check antenna connections.
● Skip channel to memory
manually. (See page 15.)
Remote Control
will not work.
● Check batteries.
● Check if TV set is plugged in.
● Replace batteries.
● Aim remote towards front
of TV.
Colour Spot On
The CRT
● Keep away your TV set from magnetic source, then turn-off your
TV setand disconnect TV's power cord from AC outlet, keep this
condition about more than 60 minutes and turn-on again your TV
set if time is reach. If colour spot is not disappear after this solution
have done, please contact your local dealer.
