33
7. Operation with an RS-232C Cable
To print with an optional RS-232C cable connected to a PC or a handheld
terminal, perform the following operations.
1. Remove the USB/DIP switch cover, and set the DIP switch (DSW) to
DSW-1, 2, 3, 4 = (OFF, OFF, OFF, OFF).
2. Remove the RS-232C connector cover.
3. Insert the RS-232C cable into the connector.
Match the arrow on the RS-232C cable connector with the arrow beside
the printer connector, and insert it firmly.
4. Connect the other end of the RS-232C cable to the connector on the PC
or the handheld terminal.
For the connector on the PC or the handheld terminal, see the manuals
provided with that equipment.
RS-232C cable
RS-232C cover
