SATO XL4xxe Manual

next previous

< previous | home | next >

EZ Manual: XL4xxe 9

Barcode SATO International Pte Ltd

Cutter Sensor

Adjustment continued

Cut sensor type Sensor Level Voltage

High level (Position a TAG in the : More than (+) 6.0Volts to less than

sensor’s field of view.) (+) 7.0Volts

Center Hole

Low level (Position a Center Hole : Less than (+) 0.5Volts

in the sensor’s field of view.)

High level (Position a I-Mark in the : More than (+) 6.0Volts to less than

sensor’s field of view.) (+) 7.0 volts

I-Mark

Low level (Position a NON I-Mark : Less than (+) 0.5Volts

in the sensor’s field of view.)

High level (Position a TAG in the : More than (+) 6.0Volts to less than

sensor’s field of view.) (+) 7.0Volts

R-Corner

Low level (Position a R-Corner in the : Less than (+) 0.5Volts

sensor’s field of view.)

GND

I-Mark

Center-Hole