B1051061 Rev. – USBCam2 User Guide
20
Appendix A. Reference Information
A-1. Removal and Replacement Procedures
There are no user-serviceable parts in the USBCam2 system. Should you experience
problems with the USBCam2, please contact your local distributor of Schick Technologies
products. In the United States, Schick Technologies products are available exclusively
through Patterson Dental Supply, Inc. Call your local Patterson representative, local
Patterson branch, or 1-800-873-7683 for more information.
A-2. Summary of Specifications
USBCam2 is ETL-certified and compliant with the safety standards listed below.
Table 4. Specifications
Item Value
CAN/CSA C22.2
No.601.1-M90
Medical Electrical Equipment Part 1: General
Requirements for Safety
EC 93/42/EEC Medical Device Directive
IEC60601-1
Medical Electrical Equipment Part 1: General
Requirements for Safety
IEC60601-1-2
Medical Electrical Equipment Part 1: General
Requirements for Safety 2.Collateral Standard:
Electromagnetic Compatibility – Requirements and Tests
EMC/Safety
UL60601-1
Medical Electrical Equipment: General Requirements for
Safety
Input electrical rating 5VDC @ 440mA
Transport and storage
conditions
Ambient temperature range: 0° F (-18° C) to 150° F (66° C)
Relative humidity range: less than 75%
Atmospheric pressure range: 700 hPa to 1060 hPa
Equipment type
Type BF equipment
(on handpiece)
Fuse 63VDC/VAC, 1A fast blow fuse
Restricted service
statement
Unless otherwise specified, this unit should be serviced only by the
manufacturer. It contains no user-serviceable parts.
Imager CCD
Video output High Speed USB 2.0
Focus range 5 - 45 mm (0.2 - 1.77 in)
Focus type Fixed
External power supply None (power supplied via USB)
Maximum cable length 5 m (5.5 yds)
