![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/a/7f/a7f12fae-a1be-4e0e-b053-042c9b705429/a7f12fae-a1be-4e0e-b053-042c9b705429-bg6.png)
u
Date setting should always be carried out after the time is correctly set.
u
Manual date adjustment is required on the first day after a month that has
less than 31 days: February, April, June, September and November.
l
How to set the date
Pull out to first click.
Turn clockwise to set the date.
* While you are setting the date, do not
press either button A or B, as pressing
button A or B while the crown is at
the first click position can change
the mode and the settings in some
modes.
* Do not set the date during any time
between 9:00 P.M. and 1:00 A.M.
Date setting during this time period
may cause failure of date change on
the following day.
Push back in to normal position.
YACHT TIMER MODE
u
Yacht timer combines the functions of a count down timer and a stop watch
that starts operating automatically when the timer finishes counting down.
This function is particularly useful in yacht racing.
l
Yacht timer operation
• There are 3 pre-set yachting timer modes: 5-minute, 6-minute and
10-minute timers.
• Upon activating the yacht timer function, the selected yacht timer starts
counting down in 1-second increments.
• The remaining time is indicated by the center hand and the two hands
of the small watch, which turn counterclockwise while the yacht timer is
counting down.
• When the yacht timer finishes counting down, the beep will sound
indicating that time is up and the measurement is automatically switched
to the stopwatch.
• The stopwatch can measure 12 hours in 1-second increments. When the
measurement reaches 12 hours, the stopwatch automatically stops.
CROWN
CROWN
CROWN
7T84_E.indd 12-13 07.5.25 11:42:29 AM