A SERVICE OF

logo

44
full. The transmitter adapts the battery status display
according to the type of power supply used (batteries or
accupack) and ensures correct transmission of battery status
information to the receivers. Individual rechargeable battery
cells will not be identified as accupacks.
Plugging the plug-on transmitter onto a microphone
Note:
The transmitter uses the microphone body as an antenna –
therefore only microphones with a metal casing should be
used for best signal transmission.
̈ Unscrew the locking ring by turning
it fully counter-clockwise (XLR-3 socket
is unlocked).
̈ Plug the transmitter’s XLR-3F socket
onto the microphone’s XLR-3M socket.
̈ Tighten the locking ring by turning it
clockwise (in the direction of the
arrow).
³
·