35
Rear view
Using external equipment
Connecting external speakers
CAUTION
• Make sure external speakers have 4 ohm and 10 watt
specifications.
• Connect the plus/minus terminals with the correct cables.
Incorrect connection may cause a short.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Speaker Setup”, and
then press ENTER.
1
2
3
5
4
External Audio Bypass
External Audio Bypass automatically optimises the
audio quality to suit supplied speakers.
Press c/d to select “Yes” or “No”, and then
press ENTER.
Press a/b to select “External Audio
Bypass”, and then press ENTER.
NOTE
• When using external speakers, make sure to set “External
Audio Bypass” to “Yes”.
• When Dolby Virtual is on, External Audio Bypass
automatically sets to “Yes”.
Make sure to connect the speaker terminal and cable
polarity (L, +) properly
• The speaker terminal has plus (L) and minus (+) polarity.
• Plus is red and minus is black.
• The cables are also divided into plus and minus.
• When connecting the left/right speakers, be sure to
connect the plus/minus terminals with the correct cables.
NOTE
• Unplug the AC cord from the AC outlet before installing
the speakers.
Description
Sets the optimum audio for the supplied
speakers.
When you are using your own speakers,
output the original sound.
Selected item
No
Yes
Speaker Setup
How to connect the
speaker cable
Pull up the
lid.
Insert the
edge of the
cable.
11
11
1
22
22
2
33
33
3
Put the lid
back
down.
LC-32_37GA4X(E)-f 04.9.17, 7:50 AM35
