A SERVICE OF

logo

Virtual Private Networking
105
Figure 9-1
PPTP Client Setup
The PPTP client enables the CyberGuard SG appliance to establish a VPN to a remote
network running a PPTP server (usually a Microsoft Windows server).
Select PPTP VPN Client from the VPN menu and create a new VPN connection by
entering:
A descriptive name for the VPN connection. This may describe the purpose for
the connection.
The remote PPTP server IP address to connect to.
A username and password to use when logging in to the remote VPN. You may
need to obtain this information from the system administrator of the remote PPTP
server and,
Optionally, the remote network’s netmask. This is used to determine which
packets should go the remote network.
Click Add.
Warning
If you are using Windows 98, you must ensure that Dial Up Networking has been
upgraded to version 1.4 otherwise you will be unable to use MS-CHAPv2 authentication
(the recommended method).