A SERVICE OF

logo

Open as PDF
next previous
17
Basic Operations
Tips
•To record non-preset stations, select “MANUAL”
in step 3, then press TUNING +/– (or ≠/±
on the remote) to tune in the desired station.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR on
the remote before step 8 so “a” appears.
•If noise is heard while recording from the radio,
remove the aerial and put the aerial out of the
cabinet (see “To remove the AM aerial” on page 6)
to reduce the noise.
Note
You cannot record from the reverse side.