A SERVICE OF

logo

Open as PDF
next previous
12
-US
PC
AUDIO
RGB
Connecting the Personal LCD Display (continued)
Connecting a Macintosh (desktop models)
Depending on the model, you may need to use a commercially available Macintosh adapter to connect a
commercially available RGB signal cable as shown below. When you connect the Personal LCD Display
to your Macintosh, set the PC-VIDEO switch on the power supply box to “PC.”
Set the PC-VIDEO switch
to “PC.”
to monitor port to audio port
: Signal flow
RGB signal cable
to PC AUDIO
connector
to RGB connector
Audio cable
VGA type connector
(HD15, female)
to monitor
port
Power supply box
to monitor port
of Macintosh
to RGB signal cable
Macintosh
adapter
Notes on connection
• Use a commercially available Macintosh adapter which suppors the models after the Macintosh II series.
• Set the display setting to 16-inch display mode (832 × 624) or 13-inch display mode (640 × 480). The Personal
LCD Display cannot display images with the 19-inch display mode (1024 × 768) setting or more.
(D-Sub 15-pin,
male)