![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/70/870fb1a6-43ac-4008-8d2f-cb5367ac700e/870fb1a6-43ac-4008-8d2f-cb5367ac700e-bg5.png)
© Titan Tool Inc. All rights reserved. 5
English
Troubleshooting
IMPORTANT:
• The turbine motor can be damaged if not serviced properly.
Have the brushes (Kit P/N 0277243) checked for wear by an
authorized service center every 400 hours.
• Clean lters regularly. When the lter warning light comes
on, it is time to clean the lters. Clogged lters cam cause
excessive heat and possibly damage the unit.
• For additional troubleshooting information, see the manual
that came with your gun.
Titan 30-Day Satisfaction Guarantee
If, within a 30-day period from the date of purchase, you are not totally satised with a TITAN unit, you may return it for full credit toward
another TITAN product of equal or greater value.
Problem
A. Restricted air ow or no air ow
B. Filter warning light is on
C. The turbine has no power
D. Excessive arcing/sparking in the
turbine
Cause
1. Air ow adjustment knob on the spray gun is
turned o
2. Air lters are clogged
1. Air lters are clogged
1. No power at the power supply
2. Circuit breaker has been tripped.
3. Worn turbine brushes
1. Worn turbine brushes
2. Damaged commutator
Solution
1. Adjust the air ow adjustment knob
2. Clean or replace the lters
1. Clean or replace the lters
1. Check the power supply
2. Reset the breaker. If problem persists, have turbine
inspected at an authorized Titan service center.
3. Have the brushes replaced at an authorized Titan service
center
1. Have the brushes replaced at an authorized Titan service
center
2. Replace the turbine (contact a Titan service technician)
Specications
Air pressure 7.5 psi
Power 120VAC, 60 Hz, 10.7 A
Turbine weight 21.0 lbs
Main hose length 25 ft
Spray gun included Maxum II
Product Registration
Register your product at www.titantool.com
Serial Number Location