49
Adjustments &
Settings
Volume Adjusting the sound volume developed from speakerADJ.
Speaker output On The sound is developed from the speakersSET
Off No sound is developed from the speakersSET
Reset
The adjustments and settings of FULL MENU [Audio] are returned to the factory default setting
EXEC.
-
-
-
Loudness On The loudness effect is added to the speaker soundSET
Off The loudness effect is not added to the speaker soundSET
Ye s
(common)
Ye s
(common)
Ye s
(common)
Ye s
(common)
Ye s
(common)
Ye s
(common)
Ye s
(common)
Ye s
(common)
-
Channel select L+R
The sound of the left and right channels is mixed and developed from the speaker
SET
L
Only the sound of the left input channel is developed from the speaker
SET
R
Only the sound of the right channel is developed from the speaker
SET
Ye sYe s Ye s Ye s Ye s Ye s -
Digital RGB
Y/P
B
/P
R
Video
The relationship between input source and item Yes: Adjustable -: Not displayed
S-Video Camera
Analog RGB(1) Analog RGB(2)
FULL MENU adjustments and settings - Audio
• When the camera input is selected, the sound is not developed.
•
Each item can be set at every input sources except the camera input, but the settings made at one input source are applied to all input sources as shown
in the table. The sound volume can be adjusted for each input source except the camera input.
• The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord
is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.
You can set the sound developed from the speaker from FULL MENU [Audio].
To operate FULL MENU, refer to page .
44
Notes
