11
HOW TO USE YOUR PHONE
PAUSE
During the Phonebook storage procedure, you may wish to press the button to
insert a pause between numbers. (This is sometimes useful for accessing a switch board,
telephone banking or long distance dialling).
Pressing buttonmore than once will increase the pause between digits.
Each time the button is pressed, a 'P' will show on the LCD to indicate a 2 second
pause in the dialling sequence. Each pause counts as one digit.
FLASH
MUTE
HOLD
MUSIC ON HOLD
The Flash feature can be used to momentarily break the line for transferring calls on a
PABXsystem or for a Call Waiting service.
While talking, you hear the call waiting signal (series of beep tones), press the
button then to switch call and put the current call on hold.
Toswitch back to original call, press the button then
1. Pressing + toggles the call between the incoming and the original call.
2. Pressing + will drop the current call connection and pick up the
incoming call or the call on hold.
Press the buttonto turn off the handset microphone, allowing private
conversations in the same room without the other party hearing.
Press the buttonagain to resume the conversation with the calling party.
Toplace a call on hold, press the button and hang up.
Tobegin conversation again, pick up the handset or press the button or pick up
an extension phone (if available).
When a call is placed on hold, the FP106 will play a popular melody to reassure your
caller that the call has not been disconnected. The selected melody is fixed and cannot be
altered or muted.
hold
hold
mute
mute
flash
flash
pause/
redial
pause/
redial
pause/
redial
1
flash
2
abc
flash
1
2
abc
