5-3
Alignment
Transmitter Output Power
The following transmitter parameters can be ad-
justed from the computer by utilizing the Alignment
Software. Refer to the onboard help of the Align-
ment Software Manual for details.
❒ Select the band center frequency channel (CH2
or CH5), and select the “high” power output level.
Key the transmitter and adjust “TX PWR Hi“ for a
power output of 45 Watts (± 1.0 W) as indicated
on the wattmeter.
❒ Stay on the band center frequency channel (CH2
or CH5), and select the “low” power output level.
Key the transmitter and adjust “TX PWR L3“ for
a power level of 25 Watts (± 0.5 W) as indicated
on the wattmeter.
Transmitter Deviation
The following modulation parameters can be ad-
justed from the computer by utilizing the Alignment
Software. Refer to the onboard help of the Align-
ment Software Manual for details.
Microphone Audio Modulation Level
❒ Select the band center frequency channel (CH2),
and select the “low” power output level.
❒ Adjust the AF generator for 50mV (–30dBm) out-
put at 1 kHz, as applied to the microphone jack.
❒ Key the transmitter and adjust “MAX Dev
(
wide
)
“
for maximum deviation of 4.3 kHz ± 0.1 kHz as
indicated on the deviation meter.
❒ Select the band center frequency channel (CH5),
and select the “low” power output level.
❒ Adjustdjust the AF generator for 50mV (–30dBm)
output at 1 kHz, as applied to the microphone
jack.
TP1008L1023L1026 VR1001
