A SERVICE OF

logo

Thermo 90 S / Thermo 90 ST 10 Packing / Storage / Shipment
1001
10 Packing / Storage and Shipment
10.1 General
If the heater or its components are sent to Webasto
Thermosysteme GmbH for testing or repair, it must be
cleaned and packed in such a way that it is protected
against damage during handling, transport and storage.
CAUTION
Fully drain a complete heater before sending it back.
Make sure that no fuel or coolant can leak out during
packing and/or shipment.
Seal the coolant ports with dummy plugs.
The ambient temperatures listed in section 4 must not be
exceeded during storage.