7
EACH HEAT ZONE OPERATES INDEPENDENTLY.
1) Open the lid.
2) Make sure all burner control knobs are turned OFF. (Push
each burner control knob down and turn clockwise.)
ƽWARNING: The storage space under the cooking
module is intended for storage of nonflammable
items only.
ƽ DANGER
Failure to open lid while igniting the
barbecue, or not waiting 5 minutes to
allow the gas to clear if the barbecue
does not light, may result in an explosive
flame-up which can cause serious bodily
injury or death.
Manual Lighting
MANUAL LIGHTING
Summit 450
Summit 650
Manual Lighting
3) Turn the cylinder on by turning the cylinder valve
anticlockwise.
ƽWARNING: Do not lean over the open barbecue.
Keep your face and body at least one foot away from
the matchlight hole when lighting the barbecue.
4) Select Heat Zone.
5) Push LEFT burner control knob down and turn to
START/HI.
6) Push the Crossover Ignition Button several times, so
it clicks each time.
7) Check that the burner is lit by looking through the
matchlight hole above the burner control knob.
ƽWARNING: If the burner does not light, turn the
LEFT burner control knob to OFF and wait 5 minutes
to let the gas clear before you try again or try to light
with a match.
8) After the LEFT burner is lit you can turn on the
RIGHT burner.
Note - Always light the LEFT burner first. The RIGHT
burner ignites from the LEFT burner.
TO EXTINGUISH
Push down and turn each burner control knob
clockwise to OFF position.Turn gas supply OFF at the
source.
