11
TROUBLE SHOOTING - OIL FILTERING PROBLEMS
PROBLEM POSSIBLE CAUSE SOLUTION
FILTER PUMP won’t POWER SWITCH not in Press POWER SWITCH to
run FILTER position FILTER position
PUMP MOTOR OVERLOAD Allow motor to cool, then
tripped press red RESET button on
back of PUMP MOTOR
Defective POWER SWITCH Replace SWITCH
PUMP will not pump SUCTION TUBE not seated in Make sure FILTER RESER-
cooking oil SUCTION RECEPTACLE VOIR is properly installed
SUCTION TUBE O-RING Replace O-RING with one of
missing or damaged the three spares in groove
Damaged SUCTION TUBE Replace damaged
or SUCTION RECEPTACLE components
FILTER LEAF clogged Scrape crumbs and other
debris from FILTER LEAF
Service FILTER RESERVOIR
at next opportunity.
PUMP CHECK VALVE plugged Clean CHECK VALVE
or reversed Install CHECK VALVE properly
PUMP pumps lots of SUCTION TUBE not seated in Make sure FILTER RESER-
bubbles in cooking oil SUCTION RECEPTACLE VOIR is properly installed
SUCTION TUBE O-RING Replace O-RING
missing or damaged
Insufficient oil entering or in Incrementally open DRAIN
FILTER RESERVOIR VALVE and/or clear crumbs
and other debris from DRAIN
PUMP MOTOR tripped PUMP jammed with debris Unjam PUMP
won’t reset Defective PUMP HEAD Replace PUMP HEAD
Defective PUMP MOTOR Replace MOTOR only
Oil is not being filtered FILTER LEAF O-RING missing, Properly install FILTER LEAF
completely damaged or LEAF mis-installed
FILTER LEAF surface clogged AFTER OIL COOLS remove
with debris FILTER LEAF, disassemble
and clean.
