Using your refrigerator
Retrigerotor Control
/
Power Saving Control
Setting the controls.. .
Controls for the refrigerator and freezer are In the
refrigerator. When the refrigerator IS plugged In for
the first time
1 Set the REFRIGERA- -
TOR CONTROL to 3
2 Set the FREEZER
CONTROL to B.
Changing the control settings.. .
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart below.
Light Switch
Freezer Control
Give the refrigerator time to cool down com-
pletely before adding food.
(This may take sev-
eral hours.)
These settings should be about right for normal
household refrigerator usage.
The controls will be set about right when milk or
Juice IS as cold as you like and when ice cream
IS firm.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control, if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section IS
TOO WARM
QUESTIONS?
...ca’l your If Refrigerator
COOL-LINE” Section ,s
service
assistance
TOO COLD
telephone
If ICE isn’t
number
MADE FAST ENOUGH
(page 111.
If BOTH SECTIONS
are TOO WARM
REASONS:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold rcom temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
Heavy Ice usage
Very cold rmm temperature
[can’t cycle often enough)
Door opened often
Large amount of food added
Very warm o( very cold
room temperatures
RECOMMENDED CONTROL
SETTINGS:
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
Power Saving Control.. .
The
Power Saving Control
on the Control
sole operates electric heaters around the
openings. These heaters help keep moisture
formIng on the outslde of the refrigerator
Con-
door 1
from
2
Use the ‘CONSUMES LESS ENERGY” setting when
humidity is low
Use the “REDUCES EXTERIOR MOISTURE” setting
only if moisture forms on the outside of the
refrigerator
5
