![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/4/7d/47dc0d05-7b9f-406c-bd38-35b3913b414e/47dc0d05-7b9f-406c-bd38-35b3913b414e-bg14.png)
Maintenance instructions:
■ Clean lint screen after each cycle.
■ Removing accumulated lint:
• From inside the dryer cabinet:
L
int should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done
by a qualified person.
• F
rom the exhaust vent:
Lint should be removed every 2 years, or more often,
depending on dryer usage.
■ Keep area around dryer clear and free from combustible
materials, gasoline, and other flammable vapors and liquids.
■ Keep dryer area clear and free from items that would obstruct
the flow of combustion and ventilation air.
If dryer does not operate, check the following:
■ Electric supply is connected.
■ Circuit breaker is not tripped or house fuse is not blown.
■ Door is closed.
■ Controls are set in a running or “ON” position.
■ START/RESTART button has been pushed firmly.
■ For gas dryers, check that gas supply shutoff valves are set
in open position.
If you need assistance:
The Commercial Laundry Support Center will answer any
questions about operating or maintaining your dryer not covered
in the Installation Instructions.
Just dial 1-800 NO BELTS (1-800-662-3587) — the call is
toll free.
When you call, you will need the dryer model number and serial
number. Both numbers can be found on the serial-rating plate
located in the dryer door well.
MAINTENANCE INSTRUCTIONS
20