200 Specifications
Digital Recording Console 02R User’s Guide
Output Specifications
Digital Input and Output Specifications
Output connection
Actual
source
impedance
For use
with
nominal
Output level
Mixer connector
Nominal
Max be-
fore clip
STEREO OUT (L, R)
150Ω 600Ω lines
+ 4 dB
(1.23V)
+24 dB
(12.3V)
XLR-3-32 type
600Ω 10kΩ lines
–10 dBV
(316mV)
+10 dBV
(3.16V)
RCA/phono
(Unbalanced)
STUDIO MONITOR OUT (L, R) 150Ω 10kΩ lines
+ 4 dB
(1.23V)
+24 dB
(12.3V)
Phone Jack
(Balanced)
CONTROL ROOM MONITOR
OUT (L, R)
150Ω 10kΩ lines
+ 4 dB
(1.23V)
+24 dB
(12.3V)
Phone Jack
(Balanced)
AUX (1, 2, 3, 4, 5, 6) 600Ω 10kΩ lines
+ 4 dB
(1.23V)
+20 dB
(7.75V)
Phone Jack
(Unbalanced)
INSERT OUT
MIC/LINE 1 through 8
600Ω 10kΩ lines
+ 0 dB
(0.775V)
+20 dB
(7.75V)
Phone Jack
(Unbalanced)
*1
*1 INSERT OUTPUT phone jacks are balanced. (Tip=OUT, Ring=IN, Sleeve=GND)
✳ In these specifications, when dB represents are specific voltage, 0 dB is referenced to 0.775 volts RMS.
✳ In these specifications, when dBV represents are specific voltage, 0 dBV is referenced to 1 volts RMS.
PHONES 100Ω
8Ω phones 1 mW 25 mW
Stereo Phone Jack
(Unbalanced)
40Ω phones 3 mW 110 mW
Input/Output Format Level Mixer connector
DIGITAL IN (COAXIAL)
(2TRK IN 2, 3)
IEC958 Consumer
(S/PDIF)
0.5Vpp/75Ω RCA/phono jack
DIGITAL OUT (COAXIAL)
(STEREO OUT)
IEC958 Consumer
(S/PDIF)
0.5Vpp/75Ω RCA/phono jack
DIGITAL IN (AES/EBU)
(2TRK IN 1)
IEC958 Professional
(AES/EBU)
RS422 XLR-3-32 type
DIGITAL OUT (AES/EBU)
(STEREO OUT)
IEC958 Professional
(AES/EBU)
RS422 XLR-3-31 type
WORD CLOCK IN – TTL / 75Ω BNC
WORD CLOCK OUT – TTL / 75Ω BNC
MIDI IN MIDI – DIN Connector 5P
MIDI OUT MIDI – DIN Connector 5P
MIDI THRU MIDI – DIN Connector 5P
TO HOST –– MiniDIN Connector 8P
METER – RS422 Dsub Connector 15p
MTC IN MIDI – DIN Connector 5P
TC IN SMPTE Nominal –10 dBV/10kΩ RCA/phono jack
