INSTRUMENT AND CONTROL FUNCTIONS
4-8
4
EAU54781
Multi-function meter unit
EWA12422
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
The select switch “ / ” and the
menu switch “MENU” are located on
the left handlebar. These switches al-
low you to control or change the set-
tings of the multi-function meter unit.
The multi-function meter unit is
equipped with the following:
● a speedometer
● a tachometer
● a clock
● a fuel meter
● a transmission gear display
● a drive mode display (which shows
the selected drive mode)
● a function display (which shows
the selected function)
● an information display (which
shows various information, such
as the odometer reading)
● a setting mode display (which al-
lows you to set, select, or reset the
items shown in the information dis-
play)
● a self-diagnosis device
● Be sure to turn the key to “ON” be-
fore pushing the select
switch “ / ”, menu switch
“MENU”, “RESET” button and
“TCS” button.
● To switch the meter displays be-
tween kilometers and miles, see
page 4-14.
1. “RESET” button
2. “TCS” button
3. Tachometer
4. Clock
5. Fuel meter
6. Eco indicator “ECO”
7. Drive mode display
8. Speedometer
9. Transmission gear display
10.Function display
11.Information display
GEAR
N
77
A.TEMP ˚F
Lo
C.TEMP ˚F
0:06
TIME TRIP
1. Menu switch “MENU”
2. Select switch “ / ”
U1MC10E0.book Page 8 Monday, July 30, 2012 4:56 PM
