77
Volume R2 =108
Octave R2 = 2
Pan R2 = 40
RevDepth R2 =120
ChoDepth R2 =108
DspDepth R2 =112
[NEXT] button [BACK] button
75
3
Select the desired parameter by pressing the [NEXT]/[BACK]
button.
Part Settings
• The Octave parameter of
the style tracks cannot be
edited.
• Minus settings for the Octave
and Pan parameters can be
directly entered by pressing
the appropriate number
button while holding the
[-/NO] button.
4
Adjust the volume or parameters.
Use the data dial, the [+/YES] button or the [-/NO] button.
The order of Steps 2 and 3 here can be reversed; you can also select the part
after selecting the parameter. (In step #2 above, the Volume parameter is
shown as an example; however, any of the other parameters shown in step #3
can be selected.)
5
Repeat steps 2 to 4, as necessary.
6
Press the [EXIT] button to exit from the Mixer.
[NEXT] button [BACK] button
[NEXT] button [BACK] button
[NEXT] button [BACK] button
[NEXT] button [BACK] button
