Basic Structure
Internal Structure (System Overview)
120
Owner’s Manual
● Part EQ
This 3-band EQ is applied to each part of the Performance/Multi, The high band and low band are the shelving type. The
middle band is the peaking type.
n The part EQ is not available in the Voice mode.
● Master EQ
Master EQ is applied to the final (post-effect), overall sound of the instrument. In this EQ, all bands can be set to peaking, or
the lowest and highest bands can be set to shelving (as shown below).
[PERFORM] → Performance selection → [EDIT] → Part selection → [F3] EQ
[MULTI/SEQ PLAY] (select Multi mode) → Multi selection → [EDIT] → Part selection → [F3] EQ
[VOICE] → Voice selection → [UTILITY] → [F3] VOICE → [SF1] MEQ
[PERFORM] → Performance selection → [EDIT] → [COMMON] → [F2] OUT/MEF → [SF2] MEQ
[MULTI/SEQ PLAY] (select Multi mode) → Multi selection → [EDIT] → [COMMON] → [F2] MEQ/MEF → [SF1] MEQ
EQ for which all bands are set to peaking type EQ for which LOW and HIGH are set to shelving type
–
+
0
LOW HIGHMID
Gain
3 bands
Q (frequency bandwidth)
Frequency
LOW HIGHHIGHMIDMIDLOWMID
–
+
0
Gain
3 bands
Q (frequency bandwidth)
Frequency
LOW HIGHHIGHMIDMIDLOWMID
–
+
0
Gain
5 bands
Q (frequency bandwidth)
Frequency
