40
Initial settings
Speaker settings
1
At the initial settings screen (on page 30)
Press the cursor buttons (A, B) to select
“8 Speaker Setting” and press SELECT.
ÁUnderlined item is a factory preset.
2
Press the cursor buttons (A, B, C, D) to
select the preferred item and press
SELECT.
3
Press the cursor buttons (A, B) to select
the preferred value and press SELECT.
Speaker icons:
ÁIf the speaker is connected, display the icon by using the
cursor buttons (A, B) and pressing SELECT.
ÁIf the speaker supports low-frequency (under 100 Hz)
reproduction, select the larger icon. If the speaker does
not support low-frequency (under 100 Hz) reproduction,
select the smaller icon. [When the subwoofer is not con-
nected, be sure to select “Large” for the front speakers
(L/R).]
Center
Large/Small/
No
Center
Delay time (
0 ms)
Front (L)
Large/Small
Test
signal
Surround (L)
Large/Small/No
Surround (L)
Channel balance (
0 dB)
Surround (R)
Large/Small/
No
Surround (L/R)
Delay time (
0 ms)
Subwoofer
Channel balance
(
0 dB)
Subwoofer
Yes/
No
Front (R)
Large/Small
Center
Channel balance (
0 dB)
In the case of surround speaker (L)
ÁLarge/Yes
POWER
@
STOP
TITLE
SUBTITLE
MARKER
ANGLEAUDIO
ON SCREEN RETURN
MENU
SELECT
H
SKIP IF
G
D
PLAY
g
STILL/PAUSE
OPEN/CLOSE
*/ I
PLAY MODE
REPEAT
A-B CLEAR
DVD
SET UP
SLOW/
SEARCH
SELECT
L R
Press RETURN to cancel
Speaker Setting
Exit
Test
0
dB
0
dB
0
dB
0
dB
0
ms
0
ms
Exit
ÁSmall/Yes ÁNo
Surround (R)
Channel balance (
0 dB)
