Filter
Top Products
15. product should be operated only from the type of
power source indicated on the marking label. If you are not
sure of the type of power supply to your home, consult your
product dealer or local power company. For products
intended to operate from battery power, or other sources,
refer to the operating instructions.
This
15. product should be operated only from the type of
power
source indicated on the marking label. If you are not
sure
of the type of power supply to your home, consult your
product
dealer or local power company. For products
intended
to operate from battery power, or other sources,
refer
to the operating instructions.
This
8. not install near any heat sources such as radiators, heat
register, stoves, or other apparatus (including amplifiers)
that produce heat.
Do
8. not install near any heat sources such as radiators, heat
register,
stoves, or other apparatus (including amplifiers)
that
produce heat.
Do
9. not defeat the safety purpose of the polarized or
grounding-type plug.A polarized plug has two blades with
one wider than the other.A grounding type plug has two
blades and third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Do
9. not defeat the safety purpose of the polarized or
grounding-type
plug.A polarized plug has two blades with
one
wider than the other.A grounding type plug has two
blades
and third grounding prong. The wide blade or the
third
prong are provided for your safety. If the provided plug
does
not fit into your outlet, consult an electrician for
replacement
of the obsolete outlet.
Do
10. the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Protect
10. the power cord from being walked on or pinched
particularly
at plugs, convenience receptacles, and the
point
where they exit from the apparatus.
Protect
11. use attachments and accessories specified by the
manufacturer.
Only11. use attachments and accessories specified by the
manufacturer.
Only
12. only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart.
Use
12. only with the cart, stand, tripod,
bracket,
or table specified by the
manufacturer,
or sold with the apparatus.
When
a cart is used, use caution when
moving
the cart.
Use
13. this apparatus during lightning storms or unused
for long period of time. Apparatus combination to avoid
injury from tip-cover.
Unplug
13. this apparatus during lightning storms or unused
for
long period of time. Apparatus combination to avoid
injury
from tip-cover.
Unplug
14. all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Refer
14. all servicing to qualified service personnel.
Servicing
is required when the apparatus has been
damaged
in any way, such as power-supply cord or plug is
damaged,
liquid has been spilled or objects have fallen into
the
apparatus, the apparatus has been exposed to rain or
moisture,
does not operate normally, or has been dropped.
Refer
20.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
Replacement Parts
20.
When
replacement parts are required, be sure the service
technician
has used replacement parts specified by the
manufacturer
or have the same characteristics as the
original
part. Unauthorized substitutions may result in fire,
electric
shock, or other hazards.
Replacement
Parts
21.
Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating
condition.
Safety Check
21.
Upon
completion of any service or repairs to this product,
ask
the service technician to perform safety checks to
determine
that the product is in proper operating
condition.
Safety
Check
22.
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.Any mounting of the
product should follow the manufacturer instructions, and
should use a mounting accessory recommended by the
manufacturer.
Wall or Ceiling Mounting
22.
The
product should be mounted to a wall or ceiling only as
recommended
by the manufacturer.Any mounting of the
product
should follow the manufacturer instructions, and
should
use a mounting accessory recommended by the
manufacturer.
Wall
or Ceiling Mounting
23.
Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
Wet location marking
23.
Apparatus
shall not be exposed to dripping or splashing
and
no objects filled with liquids, such as vases, shall be
placed
on the apparatus.
Wet
location marking
1. These Instructions.Read1. These Instructions.Read
2. These Instructions.Keep2. These Instructions.Keep
3. All Warnings.Heed3. All Warnings.Heed
4. All Instructions.Follow4. All Instructions.Follow
5. not use this product near water.Do5. not use this product near water.Do
6. only with dry cloth.Clean6. only with dry cloth.Clean
7. not block any ventilation openings.Do7. not block any ventilation openings.Do
Important Safety instructionsImportant Safety instructions
A2
16.
The product is equipped with an attachment plug having
overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting of
protective device. If replacement of the plug is required, be
sure the service technician has used a replacement plug
specified by the manufacturer that has the same overload
protection as the original plug.
Protective Attachment Plug
16.
The
product is equipped with an attachment plug having
overload
protection. This is a safety feature. See
Instruction
Manual for replacement or resetting of
protective
device. If replacement of the plug is required, be
sure
the service technician has used a replacement plug
specified
by the manufacturer that has the same overload
protection
as the original plug.
Protective Attachment
Plug
17.
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Power Lines
17.
An
outside antenna system should not be located in the
vicinity
of overhead power lines or other electric light or
power
circuits, or where it can fall into such power lines or
circuits.
When installing an outside antenna system,
extreme
care should be taken to keep from touching such
power
lines or circuits as contact with them might be fatal.
Power
Lines
19.
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
Object and Liquid Entry
19.
Never
push objects of any kind into this product through
openings
as they may touch dangerous voltage points or
short-out
parts that could result in a fire or electric shock.
Never
spill liquid of any kind on the product.
Object
and Liquid Entry
24.
If an outside antenna or cable system is connected to the
product, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges
and built-up static charges.Article 810 of the National
Electrical Code,ANSI/NFPA70, provides information with
regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
See figure below.
Outdoor Antenna Grounding
24.
If
an outside antenna or cable system is connected to the
product,
be sure the antenna or cable system is grounded
so
as to provide some protection against voltage surges
and
built-up static charges.Article 810 of the National
Electrical
Code,ANSI/NFPA70, provides information with
regard
to proper grounding of the mast and supporting
structure,
grounding of the lead-in wire to an antenna
discharge
unit, size of grounding conductors, location of
antenna
discharge unit, connection to grounding
electrodes,
and requirements for the grounding electrode.
See
figure below.
Outdoor Antenna
Grounding
25.
If your product is not operating correctly or exhibits a
marked change in performance and you are unable to
restore normal operation by following the detailed
procedure in its operating instructions, do not attempt to
service it yourself as operating instructions, do not attempt
to service it yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personal.
Servicing
25.
If
your product is not operating correctly or exhibits a
marked
change in performance and you are unable to
restore
normal operation by following the detailed
procedure
in its operating instructions, do not attempt to
service
it yourself as operating instructions, do not attempt
to
service it yourself as opening or removing covers may
expose
you to dangerous voltage or other hazards. Refer
all
servicing to qualified service personal.
Servicing
18.
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire
or electric shock.
Overloading
18.
Do
not overload wall outlets, extension cords, or integral
convenience
receptacles as this can result in a risk of fire
or
electric shock.
Overloading