Filter
Top Products
15
General Operation
Make sure all external components (players, speakers, microphones) are connected before
you turn on the KJV-835. See privies pages for connection information.
Powering On/Off:
Press POWER button on the front panel. There is no power button on the remote control.
When the POWER is turned ON, indicator lights on the front panel illuminate. Press the
POWER button again to turn OFF.
Selecting Desired Input Source:
In order for external video and audio sources to play, the correct input source must be
selected. From the front panel, press one of the four buttons in the INPUT SELECTOR section:
-DVD button selects the source connected to DVD INPUT on the rear panel.
-AUX button selects the source connected to AUX INPUT on the front panel.
-PC button selects the source connected to PC CONNECTION on the rear panel.
-RECORD button selects the source from Recording module on the front panel.
Press AUTO button to set the input source selection to automatic mode. In this mode input
selection defaults to the external source currently/last powered on.
MONITOR INPUT
AUXDVD RECORDPC
A.V INPUT
KEY
MULTIPLEX
NORMAL
LOW
DVD
AUTO
HIGH
AUX PC RECORD
KJV-835 400W KJ VIDEO AMPLIFIER
cesonic
ON/OFF
BBE
REMOTE
16 BIT DIGITAL KEY CONTROLLER
KEY:
A.V INPUT : RECORD
MONITOR : RECORD
BBE L R
Selecting Monitor Input Source:
In order for external video and audio sources to play on the LCD monitor, the correct input
source must be selected. From the front panel, press one of the four buttons in the INPUT
SELECTOR section:
-DVD button selects the source connected to DVD INPUT on the rear panel.
-AUX button selects the source connected to AUX INPUT on the front panel.
-PC button selects the source connected to PC CONNECTION on the rear panel.
-RECORD button selects the source from Recording module on the front panel.
Please note, all the sources you choose only display on the LCD monitor and monitor audio out
put at the rear of machine. it will not change the A/V output from KJV-835