Filter
Top Products
The C 5 is a condenser microphone and therefore
needs a powersupply.
The microphone provides a balanced output on a
3-pin male XLRconnector:
Pin 1: ground
Pin 2: hot
Pin 3: return
1. Use an XLR cable to connect the microphone
to a balanced XLRinput with phantom power.
2. Switch the phantom power on. (Refer to the
manual of the unit to which you connected
your microphone.)
2 Interfacing
AKG C 5
15
BDA C5-Hex-korr.:BDA_A6_2006 12/4/06 2:03 PM Seite 15