AKG Acoustics PT 4500 Microphone User Manual


 
2 Description
2.4.2 Microphones,
Instrument Cable
(optional)
Refer to fig. 2.
ACTIVE and SILENT modes only:
Short push: calls up a parameter for adjustment or confirms a selected value.
Turn left briefly to select a menu item or decrease a parameter value.
Turn right briefly to select a menu item or increase a parameter value.
Turn left or right and hold to scroll through available values.
7 Charging contacts: The recessed charging contacts allow you to recharge the optional
AKG BP 4000 battery pack on the optional CU 4000 charger without having to remove
the battery pack from the transmitter.
8 REMOTE MUTE jack:This jack allows you to connect the optional Remote Mute switch.
9 Antenna: Permanently connected, flexible antenna.
10 Battery conmpartment door
11 Frequency sticker: Sticker attached to the transmitter rear panel, indicating the avail-
able carrier frequency range and approval data.
12 Battery compartment accepting the two supplied 1.5 V AA size batteries or the optional
BP 4000 battery pack.
13 Belt Clip for fixing the transmitter to your belt.
You can connect the following microphones to the audio input of the PT 4500:
CK 55 L, C 417 L, C 520 L, C 555 L
C 516 ML, C 518 ML, C 519 ML
The MKG L instrument cable from AKG lets you connect an electric guitar, electric bass,
or remote keyboard to the bodypack transmitter. For further details, refer to the respec-
tive AKG brochures or visit www.akg.com.
24
PT 4500