Filter
Top Products
1 Quick Start Guide
15
If you can’t wait to get started
The Alesis Smashup is a unique product, but its basic hookup and
operation is similar to other in-line signal processors (like EQs and
compressors) in most respects. If you're experienced with signal
processors, this chapter is a "shorthand" guide for those who want
to start using the Smashup right away. If you have questions about
any of the features, don’t worry – later chapters will unveil the
mysteries of the Smashup's special features.
Hook it up to a synthesizer
1. First, make sure the power is off to all the components
you’re connecting: amp, mixer, and instruments.
2. Pull the Smashup and its power supply out of the
package.
3. Using a pair of 1/4” instrument cables, plug the outputs
of the synthesizer into the INPUTS on the back of the
Smashup.
4. Connect the OUTPUTS of the Smashup to the inputs
of a mixer, powered speakers, or instrument amplifier.
5. Insert the power jack of the Smashup’s power adapter
into the POWER 9VAC input on the rear panel of the
Smashup and plug the power adapter into an AC outlet
(preferably on a power strip with its switch off).
The Smashup doesn’t have a POWER switch of its own. The
moment you plug in the power, its top panel LEDs will come on.
6. Turn the power on to the system: the keyboard, then
the Smashup’s power strip (if it’s not already on), then
the mixer, then the amp.
7. Turn the INPUT TRIM knob on the back of the
Smashup while playing the keyboard to adjust the input
level. The SIGNAL LED on the top panel will light
green, not red, when the level is correct.
8. Experiment with the knob and button settings on the
Smashup to create different sounds.
For more detailed information on connecting the Smashup, see
chapter 2: Connections.
I
f you're new to signal
p
rocessing...
s ta rt with th e mo re de ta ile d
ins tr uc tio ns fo r ho o ku p a nd
o pe ra tio n sta rtin g in th e n ex t
c ha
p
ter .