Nilfisk-ALTO S-6 Musical Instrument User Manual


 
19
- MAIN MIX OUTPUT
Input
- 2-TRACK IN/OUT
20
This stereo output is controlled by the Main Mix
Level on the front panel and will send the audio
signal to an amplifier. The output level can be
varied from - to +15dB.
2-TRACK IN/OUT
TAPE IN TAPE OUT
RIGHT
LEFT
MAIN MIX OUTPUT
R
L
19
20
- STEREO AUX RETURN
Use these stereo 1/4" phone socket to return the sound of an effect unit or sound processor to the Main Mix.
Alternatively you can use them as an extra auxiliary input.
21
9
Use the Tape input if you wish to listen to your
Mix from a Taper Recorder or DAT, You can
the signal coming form the Taper Recorder
either to a pair of studio monitor using the Control
Room assignment on the front panel or you can
also send the signal directly to the Main Mix.
Output
These 1/4" TRS sockets will route the main mix into a tape recorder.
21
STEREO
AUX RETURN
AUX SENDS
LEFT(MONO)
PHONES
CONTROL ROOM
OUTPUT
LEFT
RIGHT RIGHT
6-CHANNEL MIXING CONSOLE
S-6
LTO
R
22
23
24
- AUX SENDS
This 1/4" phone socket is used to send out the signal from the AUX Bus to external devices such as effects and
sound processors.
22
- PHONES
This socket will send out the signal mix to a pair of headphones.
23
- CONTROL ROOM OUTPUT
These 1/4" phone sockets will be used to send the signal to Studio Monitor speakers or to a second set of PA.
24