Filter
Top Products
Technical Specifications - Model: DX5R, 4 Channel Rotary Audio Mixer.
POWER SUPPLY: AC 115/230V, 50/60Hz (External 18V~800mA
Power Supply)
DIMENSIONS: 254 (W) x 308 (D) x 102.5 (H) mm
WEIGHT: 5.5 Lbs./2.8Kgs
CROSSFADER: Optical detecting fader start control -
Low Residue Resistance Crossfader.
POWER CONSUMPTION: 12 Watts Typical /
16 Watt with full headphone output
HEADPHONE IMPEDANCE: 16 Ohms
ENVIRONMENTAL CONDITION: Operating Temperature 5 to 35 deg. C
Humidity 25 to 85% RH (non-condensing)
Storage Temperature -20 to 60 deg. C
INPUT SENSITIVITY:
LINE: 10K ohm input impedance
70mV rms sensitivity for 0dBm output
PHONO: 47Kohm input impedance
1.1mV rms sensitivity @ 1KHz for 0dBm output
MICROPHONE: 10Kohm input impedance unbalanced
1.0mV rms sensitivity for 0dBm output
500mV rms max Input Sensitivity (Level/
Impedance): Note: 0dBV=1Vrms
OUTPUT SENSITIVITY:
MASTER OUT:
9V rms max
HeadPHONES: 0.5W into 47ohm
FREQUENCY RESPONSE:
LINE: 20Hz-22KHz +/-0.5dB
PHONO: +/-1dB except for controlled attenuation of -3dB
@ 20Hz to reduce rumble and feedback
MICROPHONE: 20Hz-15KHz +/-0.5dB
SIGNAL TO NOISE RATIO: (MAXIMUM OUTPUT):
LINE: Better than 94dB
PHONO: Better than 85dB
MIC: Better than 76dB
THD - Total Harmonic Distortion:
MASTER OUTPUT: Less Than 0.1%
EQUALIZER:
BASS: +12/-12dB @100Hz
LOW MIDDLE: +12/-12dB @1KHz
HIGH MIDDLE: +12/-12dB @4KHz
TREBLE: +12/-12dB @12KHz
Components and parts are subject to change for improvements within the range of the specifications.
DX5R™ Specifications
©American Audio® - www.AmericanAudio.us - DX5R™ Instruction Manual Page 17